Offshore mounts....

[Full Force]

Anyone have any offshore mounts for 8 qt pans? I went to install my engine mounts and they don't clear my new pans, I need new mounts or go back to 5 qt. pans, does anyone have either? pans are easier, it had 5 qt pans for 21 yrs, I may just put the 5 qt pans back on for now, I don't really have the extra cash for the mounts now..

if anyone has 5 qt pans let me know...

[Full Force]

A pic of my problem... I held it forward on the engine to show the issue.. I may cut the center and lower it but then I start to have iissues witgh clearing the hull... this is fuking crazy...

http://i36.photobucket.com/albums/e41/86lxmustang/113_8031.jpg
http://i36.photobucket.com/albums/e41/86lxmustang/113_8030.jpg

[ErieRunnin]

well i know i'm good at one thing...and thats taking great pictures

[Full Force]

They only show mine on the site... so how do you use these with big pans?

http://www.gilmarine.com/products/mmounts/index.html

[ErieRunnin]

They only show mine on the site... so how do you use these with big pans?

http://www.gilmarine.com/products/mmounts/index.html

Could be running something like this...which wouldnt be a problem

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MOR%2D20460&N=700+4294840045+4294908395+115&autoview=sku

[Full Force]

Yea.... expensive...

[Full Force]

I think I have 10QT. pans....

http://cgi.ebay.com/ebaymotors/BBC-10QT-OIL-PAN_W0QQitemZ320239921264QQihZ011QQcategoryZ50442Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

[ErieRunnin]

Yea.... expensive...

well, I think Lil Bro might be Bailing you out once again....

[Full Force]

This is mine..

http://i36.photobucket.com/albums/e41/86lxmustang/113_8032.jpg

[bajalion]

UMMMM....call me stupid but leave the other pans on. DON"T TOUCH THE BRACKET....you will be messing with the structure of your hull.

[Full Force]

Bob, call me when you are awake... i tried to call you last night.

[SKRAMER]

Dude what hit me last night!!!

[Full Force]

Dude what hit me last night!!!
Not sure... maybe the same thing to hit me tonight.... I may try and get my buddy and his wif to come with me tonight.. I am on my way in a minute to meet Rogue to get a known 8Qt. pan to compare with mine... I will call ya.

[Scott]

Hard to tell in the picture but how far is the pan keeping the mount from bolting up??

[ErieRunnin]

Hard to tell in the picture but how far is the pan keeping the mount from bolting up??

it's roughly 2-3 inches

[Scott]

it's roughly 2-3 inches
Never mind:(

[Full Force]

Never mind:(

Are you thinking what I was? A HAMMER!!!!!!!!

[Full Force]

This is the best option i found so far...

only money right??

http://store.summitracing.com/partdetail.asp?autofilter=1&part=HAM%2D1488&N=700+4294925232+4294839075+4294840045+4294908395+ 4294908216+4294840133+4294889122+4294873401+115&autoview=sku

[TEAMBAJA]

I think you are on the wrong site for a question like this. Ask something about booze and we'd be on page 7 by now. :hijacked:

[baja power]

I guess filling them with water and measuring what they hold is out of the question.

[Scott]

Are you thinking what I was? A HAMMER!!!!!!!!

Well I'm going to sugar coat it and say body work:o

[Full Force]

Well I'm going to sugar coat it and say body work:o

Agreed.... I took care of it, went to Summit and bought two pans.

[ErieRunnin]

THANKS RON

[Full Force]

THANKS RON

Hey... you earned a seat today!!


You know I appreciate it... Ron donated to the Full Force fund today.

[Scott]

So what size pans did you end up with?

[Full Force]

So what size pans did you end up with?

I bought the Hamburger Marine pan from Summit, nice pan... 8 qt. with baffles/doors so the sump stays full, came with P/U and gaskets for 200.00 each, great deal.

I will post a pic in a few hrs when I get them on, i need to go weld the P/U to the pumps.

[Full Force]

Ok, now I am where I needed to be on Friday, hopefully engines go in this weekend coming..

http://i36.photobucket.com/albums/e41/86lxmustang/113_8034.jpg
http://i36.photobucket.com/albums/e41/86lxmustang/113_8040.jpg

[SKRAMER]

Very nice!! How was the head this morning???

[Full Force]

Very nice!! How was the head this morning???

Started off slow... I am better now... patience is short today though.... working on Dads Sea Ray now..

[tmmiibaja]

Get rid of the Fram filters!

And be ready for your moms decals!

[baja power]

Get rid of the Fram filters!



but they're cheap.:yawn:

[Full Force]

Frams are for break in, I usually run K&N after break in.

[Full Force]

Did a home made way to chang oil.... better then nthe little 1/4" dip stick way.

http://i36.photobucket.com/albums/e41/86lxmustang/113_8042.jpg

[Scott]

Just placed my filter order yesterday, notice the first two items Wix racing filters and fuel water separators fair price and no shipping costs.

Part No. QTY Your Price Total
33225 4 $7.58 $30.32
51060R 4 $7.88 $31.52
57312 2 $16.96 $33.92
51394 4 $5.10 $20.40
42841 1 $3.14 $3.14
51010 1 $6.17 $6.17
42731 1 $43.51 $43.51
Total For This Order: $168.98

[Full Force]

Where were these last week??????

http://cgi.ebay.com/ebaymotors/Offshore-Motor-Mounts-cigarette-donzi-sonic-fountian_W0QQitemZ170212583028QQihZ007QQcategoryZ5 0442QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[SKRAMER]

Those are like mine!!!

[bajalion]

Line mine too.... :) They are Merc.